How To Fix Netgear Wireless Not Working Problem?

First of all, again welcome to our Netgear setup webpage. So, this easy guide where we will help you troubleshoot your Netgear wireless router. If your Netgear wireless Router has quit working then this piece of information is just about what you need.Thus, let’s just start with basic troubleshooting Of your Netgear wireless router

Basic Steps For Netgear Setup Router Troubleshooting 

There is no rush or worry to reset your Netgear wireless router In Order to Fix Netgear Problem. So, try these ways of steps and also, consider Router Reset as The Last Option. You would be amazed ( blissful ) to Know that Most Of Router Connectivity Issue Can Be Resolved By Doing a Simple Reboot Or Power Cycle.

Restart internet modem and Router of yours. From the Router take out the Power cable and Modem and also, wait for 10 seconds before you plug it back. After that kindly restart your computer too.

 For a minute you need to wait and do look for internet light on Modem and Router of yours. But, in case you are able to see internet Light on Modem then, this means the Modem is Fine or ok. And also it means that you are getting the internet from internet service provider side of yours.

 Here, you need to look for internet light on Router of yours. So, kindly try using the internet and see if the restart helps you or not.

 But, at a time when you are done with this process, steps lets go and test the internet service provider connection and Modem.

You Can Reset Netgear router any time you want but keep it as a last resort. Now, after this, let’s start with the Basic Internet Test to detect the issue. So, in the next section, we penned down how you can test the internet.

Process To Test The Internet

First, connect the computer of yours to Modem using the Ethernet cable of yours. So, you might get confused? Thus, let us explain see the cable that is coming from Modem to Internet Port Of Your Router. Kindly disconnect that cable from your Router and Plug it Into Your Laptop Or Desktop Computer.

  • Ensure that you turn off your wireless Router and restart the Computer and Modem of yours after making the cable connection.
  • Now once your computer is restarted, please go and try using the internet with your computer if that works that will Clear Few Things, For Example, = Your Modem, Computer And Ethernet Cable All three Components Are Fine.

So, these penned above is the steps to test the internet, but in case these testing Fail of Netgear setup then you should contact your internet service provider helpline or customer support to fix the internet. And still, if you have any worry about Netgear setup, then you can ask us.

About the Author

Leave a Reply

Your email address will not be published. Required fields are marked *